IJK interface diagrams.

This is the right place to discuss on how to implement hardware vsync, adding a VIA or AY chipset, puting multiple roms, or how to design a new flash expansion card.
User avatar
barnsey123
Flight Lieutenant
Posts: 379
Joined: Fri Mar 18, 2011 10:04 am
Location: Birmingham

Re: IJK interface diagrams.

Post by barnsey123 »

I want one...
User avatar
kenneth
Squad Leader
Posts: 515
Joined: Fri Nov 26, 2010 9:11 pm
Location: France PdD
Contact:

Re: IJK interface diagrams.

Post by kenneth »

As HigashiJun is interested in making a joystick interface, and in order not to pollute the other thread, I place here the diagram of an untested pcb project almost identical to the ijk joystick interface. :wink:
ijkjoyst2020.zip
(405.87 KiB) Downloaded 257 times
Last edited by kenneth on Sun May 24, 2020 7:00 pm, edited 1 time in total.
User avatar
Silicebit.
Flight Lieutenant
Posts: 313
Joined: Thu Jan 12, 2006 10:18 pm
Location: Madrid, Spain
Contact:

Re: IJK interface diagrams.

Post by Silicebit. »

Photos of the appearance of an original IJK interface.
External appearance.
External appearance.
ijk-interface.jpg (776.68 KiB) Viewed 7695 times
Components side.
Components side.
ijk_top.jpg (2.34 MiB) Viewed 7695 times
Solder side.
Solder side.
ijk_bot.jpg (2.38 MiB) Viewed 7695 times
Last edited by Silicebit. on Sun May 03, 2020 8:15 pm, edited 1 time in total.
Oric user since 1984. YouTube
User avatar
Silicebit.
Flight Lieutenant
Posts: 313
Joined: Thu Jan 12, 2006 10:18 pm
Location: Madrid, Spain
Contact:

Re: IJK interface diagrams.

Post by Silicebit. »

Schematic diagram.
Interface IJK.pdf
Schematic.
(29.51 KiB) Downloaded 353 times
Oric user since 1984. YouTube
User avatar
HigashiJun
Flying Officer
Posts: 205
Joined: Tue Dec 10, 2019 9:29 am
Location: Tokyo (Japan)

Re: IJK interface diagrams.

Post by HigashiJun »

Nice !

Many thanks to both of you.

Cheers.
HigashiJun
Mustangus
Officer Cadet
Posts: 43
Joined: Wed Jun 22, 2016 5:37 pm

Re: IJK interface diagrams.

Post by Mustangus »

i think this will need a case made for it.
User avatar
ibisum
Wing Commander
Posts: 1646
Joined: Fri Apr 03, 2009 8:56 am
Location: Vienna, Austria
Contact:

Re: IJK interface diagrams.

Post by ibisum »

So .. we going to do a group purchase of a few of these PCB's in bulk?
Mustangus
Officer Cadet
Posts: 43
Joined: Wed Jun 22, 2016 5:37 pm

Re: IJK interface diagrams.

Post by Mustangus »

If i could get them to upload on https://jlcpcb.com/ then it wouldn't cost that much, i use them all the time nice and cheap but the pcb's are good.
User avatar
ibisum
Wing Commander
Posts: 1646
Joined: Fri Apr 03, 2009 8:56 am
Location: Vienna, Austria
Contact:

Re: IJK interface diagrams.

Post by ibisum »

Well, I'd love to have operational joystick on my Orics.

Color me interested in a couple of PCB's. To get my entire Oric fleet up and running, I'd need 8 PCB's...
User avatar
kenneth
Squad Leader
Posts: 515
Joined: Fri Nov 26, 2010 9:11 pm
Location: France PdD
Contact:

Re: IJK interface diagrams.

Post by kenneth »

Hello.
On the french site of oric.org Rijiji made a pcb according to my diagram, the holes are missing to put the 4 wires and the file is old, I will correct it so that the manufacturers recognize it. I'm now thinking of Dbug's phrase "verify before release" ... :oops:
Attachments
ijk-modif.jpg
ijk-modif.jpg (805.59 KiB) Viewed 7504 times
Mustangus
Officer Cadet
Posts: 43
Joined: Wed Jun 22, 2016 5:37 pm

Re: IJK interface diagrams.

Post by Mustangus »

Looks good. :)
User avatar
HigashiJun
Flying Officer
Posts: 205
Joined: Tue Dec 10, 2019 9:29 am
Location: Tokyo (Japan)

Re: IJK interface diagrams.

Post by HigashiJun »

Very interesting, and with a case it would be really nice...
HigashiJun
User avatar
Chema
Game master
Posts: 3014
Joined: Tue Jan 17, 2006 10:55 am
Location: Gijón, SPAIN
Contact:

Re: IJK interface diagrams.

Post by Chema »

A friend of mine is building one, and could not find an usable Gerber file with all the data to do it. He struggled to make a board with all the available info around and, I think, he is now waiting for some component to test it.

If you could point us to the post in Oric.org with the info, it would be invaluable! (I could not find it)
User avatar
Dbug
Site Admin
Posts: 4444
Joined: Fri Jan 06, 2006 10:00 pm
Location: Oslo, Norway
Contact:

Re: IJK interface diagrams.

Post by Dbug »

If somebody talented with soldering is willing to build one for me, I'm fine with paying for the work!

I had plans to make a video on the Joystick interfaces, by I only have the Opel model, so that's kind of limited content for a video :D
User avatar
kenneth
Squad Leader
Posts: 515
Joined: Fri Nov 26, 2010 9:11 pm
Location: France PdD
Contact:

Re: IJK interface diagrams.

Post by kenneth »

Chema wrote: Sat May 23, 2020 3:15 pm If you could point us to the post in Oric.org with the info, it would be invaluable! (I could not find it)
The message on Oric.org was written in MP, there's nothing more than the previous photo and ZIP file. I need to improve the PCB and create modern Gerber files. 8)
Post Reply