And now, box for the controller.
- Silicebit.
- Flight Lieutenant
- Posts: 313
- Joined: Thu Jan 12, 2006 10:18 pm
- Location: Madrid, Spain
- Contact:
And now, box for the controller.
The same guy who designed the box for the AmpliBus, has designed a box for the controller and one disk drive. You can see the good work at: http://retrowiki.es/viewtopic.php?f=40& ... p200086115
Oric user since 1984. YouTube
Re: And now, box for the controller.
Very nice job
Now imagine if he had a more accurate printer
Now imagine if he had a more accurate printer
Re: And now, box for the controller.
Nice !
Maybe that could be done for the Oric computer and the Atmostrat project.
Maybe that could be done for the Oric computer and the Atmostrat project.
- Silicebit.
- Flight Lieutenant
- Posts: 313
- Joined: Thu Jan 12, 2006 10:18 pm
- Location: Madrid, Spain
- Contact:
Re: And now, box for the controller.
Now you can download the STL files available in first post of thread. Enjoy
Oric user since 1984. YouTube
- Silicebit.
- Flight Lieutenant
- Posts: 313
- Joined: Thu Jan 12, 2006 10:18 pm
- Location: Madrid, Spain
- Contact:
Re: And now, box for the controller.
Perhaps you need a big 3D printer for print a case for Oric.
Oric user since 1984. YouTube
- coco.oric
- Squad Leader
- Posts: 720
- Joined: Tue Aug 11, 2009 9:50 am
- Location: North of France
- Contact:
Re: And now, box for the controller.
Whatever we need a big printer (i didn't have one yet), it's a very good idea to share it.
Thanks a lot
Thanks a lot
coco.oric as DidierV, CEO Member
Historic owner of Oric, Apple II, Atari ST, Amiga
Historic owner of Oric, Apple II, Atari ST, Amiga
Re: And now, box for the controller.
The Good, the Bad and the Ugly
the supports broke before printing was finished. The left and the middle boxes are
from PLA material and they are really shiny and beautiful !
Except the material, it's important to have enough patience - in my case ~20 hours per each single part!
The color theme is 'Oric-1' related, if one day I have good red/black material I'll reprint in Oric Atmos style .
I started with the right one using ABS material, but the result was extremely fragile - the supports broke before printing was finished. The left and the middle boxes are
from PLA material and they are really shiny and beautiful !
Except the material, it's important to have enough patience - in my case ~20 hours per each single part!
The color theme is 'Oric-1' related, if one day I have good red/black material I'll reprint in Oric Atmos style .
- Silicebit.
- Flight Lieutenant
- Posts: 313
- Joined: Thu Jan 12, 2006 10:18 pm
- Location: Madrid, Spain
- Contact:
Re: And now, box for the controller.
Hey iss, that's an awesome print! A pity of lost ABS!
Oric user since 1984. YouTube