On Wikipedia it reads:
"A short time after the release of the Atmos machine, a modification for the Oric-1 was issued and advertised in magazines and bulletin boards. This modification enabled the Oric-1 user to add a second rom (containing the Oric Atmos system) to a spare rom socket on the Oric-1 circuit board. Then, using a basic DPST (double pole single toggle) switch, the users could then switch between the new Oric Atmos rom and the original Oric-1 rom at their leisure."
Does anyone know where I can find these instructions and also if it is possible to add a Oric-1 ROM to a Oric Atmos (The other way around).
Oric-1/Atmos ROM Switch Information
-
- 2nd Star Corporal
- Posts: 18
- Joined: Sun Nov 03, 2013 8:31 pm
-
- Flying Officer
- Posts: 148
- Joined: Fri Oct 12, 2007 8:08 pm
Re: Oric-1/Atmos ROM Switch Information
it would be better to use a single 27c256 eprom and a pullup resistor (10k)
and a simpler spst switch.
and a simpler spst switch.