Having completed more than 20 paper reviews, I have to say that I am

fed up with bad mathematics coming from people that are supposed to be

the scientific elite (Professors, Doctors, Ph.D candidates etc). The

majority of the papers I have reviewed had problems with the units and

the dimensions (i.e. high school mathematics). To help me with the

review process I prepared two programs.

The first program identifies the units of an expression and the second

scrutinizes matrix operations.

## Scrutinize papers

### Check expression units

General

This program determines the units of an expression based on the units

of the variables involved in this expression. Only basic units of SI (i.e. kg,

m, s and K) can be used. For example a force of 1 N should be written

as 1*kg*m/s^2.

Instructions

First define the variables in lines 200-299 (value and units) and then

the expression in line 310. The program is run with RUN 10. The results

need some decryption and for this reason a "translation table" is

printed to help in their interpretation. For example if the program

identifies the units of an expression as:

KG= 2

M = 0.5

S = 0.25

KV= 1

this means (see translation table in lines 20-25) that the units are

kg/(m s^2).

Furthermore, you can print the value of the expression with ? XSN. If

you have defined reasonable values for the variables, the expression

should have a reasonable value too.

Restrictions of variable names in Oric: Only capitals, only the two

first letters of the variable name matter (i.e. for Oric KV is the same

with KVANTOUM), Basic tokens cannot be used as variable names (i.e.

EXP=1 is a SYNTAX ERROR).

1 LIST 10-19

5 ' Evangelos Rozos Jan. 2012

10 ' This program calculates the

11 ' units of an expression. Define

12 ' the variables in lines 200-299

13 ' and the expression in line 310.

14 ' Run the program with RUN 10.

15 '

20 ' Translation of results

21 ' .0625 .125 .25 .5 1

22 ' -4 -3 -2 -1 0

23 '

24 ' 16 8 4 2 1

25 ' 4 3 2 1 0

26 '

30 ' Basic units of physical quant

31 ' Force: KG*M/S^2

32 ' Pressure: KG/(M*S^2)

33 ' Viscosity: KG/(M*S)

34 '

100 ' Define Units

101 ' ************

110 KG=1: MG=KG/1000

120 M=1: LT=M^3/1000

130 S=1: HR=3600*S

140 KV=1

160 JL=N*M: KWH=3.6E06*JL

199 GOTO 400

200 '

201 ' Variables

202 ' *********

205 B=2: PHI=.2: I=1E-3

206 YIX=100*M

210 V=1*M/S

220 A=I/(V/PHI)^B

230 Q=V*YIX

298 GOSUB 300

299 RETURN

300 '

301 ' Expression

302 ' **********

310 XSN=-SQR(A*Q^2/(I*PHI^2))

311 RETURN

400 '

401 ' Investigate units

402 ' *****************

405 GOSUB 200: OSN=XSN

410 KG=KG*2: GOSUB 201: PRINT "KG=";XSN/OSN: KG=KG/2

420 M=M*2: GOSUB 201: PRINT "M =" ; XSN/OSN: M=M/2

430 S=S*2: GOSUB 201: PRINT "S =";XSN/OSN: S=S/2

450 KV=KV*2: GOSUB 201: PRINT "KV=";XSN/OSN: KV=KV/2

500 LIST 20-29

V.

This program determines the units of an expression based on the units

of the variables involved in this expression. Only basic units of SI (i.e. kg,

m, s and K) can be used. For example a force of 1 N should be written

as 1*kg*m/s^2.

Instructions

First define the variables in lines 200-299 (value and units) and then

the expression in line 310. The program is run with RUN 10. The results

need some decryption and for this reason a "translation table" is

printed to help in their interpretation. For example if the program

identifies the units of an expression as:

KG= 2

M = 0.5

S = 0.25

KV= 1

this means (see translation table in lines 20-25) that the units are

kg/(m s^2).

Furthermore, you can print the value of the expression with ? XSN. If

you have defined reasonable values for the variables, the expression

should have a reasonable value too.

Restrictions of variable names in Oric: Only capitals, only the two

first letters of the variable name matter (i.e. for Oric KV is the same

with KVANTOUM), Basic tokens cannot be used as variable names (i.e.

EXP=1 is a SYNTAX ERROR).

1 LIST 10-19

5 ' Evangelos Rozos Jan. 2012

10 ' This program calculates the

11 ' units of an expression. Define

12 ' the variables in lines 200-299

13 ' and the expression in line 310.

14 ' Run the program with RUN 10.

15 '

20 ' Translation of results

21 ' .0625 .125 .25 .5 1

22 ' -4 -3 -2 -1 0

23 '

24 ' 16 8 4 2 1

25 ' 4 3 2 1 0

26 '

30 ' Basic units of physical quant

31 ' Force: KG*M/S^2

32 ' Pressure: KG/(M*S^2)

33 ' Viscosity: KG/(M*S)

34 '

100 ' Define Units

101 ' ************

110 KG=1: MG=KG/1000

120 M=1: LT=M^3/1000

130 S=1: HR=3600*S

140 KV=1

160 JL=N*M: KWH=3.6E06*JL

199 GOTO 400

200 '

201 ' Variables

202 ' *********

205 B=2: PHI=.2: I=1E-3

206 YIX=100*M

210 V=1*M/S

220 A=I/(V/PHI)^B

230 Q=V*YIX

298 GOSUB 300

299 RETURN

300 '

301 ' Expression

302 ' **********

310 XSN=-SQR(A*Q^2/(I*PHI^2))

311 RETURN

400 '

401 ' Investigate units

402 ' *****************

405 GOSUB 200: OSN=XSN

410 KG=KG*2: GOSUB 201: PRINT "KG=";XSN/OSN: KG=KG/2

420 M=M*2: GOSUB 201: PRINT "M =" ; XSN/OSN: M=M/2

430 S=S*2: GOSUB 201: PRINT "S =";XSN/OSN: S=S/2

450 KV=KV*2: GOSUB 201: PRINT "KV=";XSN/OSN: KV=KV/2

500 LIST 20-29

V.

### Check dimensions

General

This program checks out the multiplication and addition between

matrices. More specifically, the program checks if the dimensions of

matrices follow the requirements of the operation and if so, it returns

the dimensions of the resulting matrix.

Instructions

First define the dimensions of matrices in lines 20-100. The

dimensions should be a string of three characters with the form "nxm"

("n" and/or "m" could be numbers or letters). Then define the

expression string in line 110. Only "*" and "+" can be used in this

program (parentheses cannot be processed). Run the program with RUN 10.

The matrices in lines 25-65 and the expression in 110 in this code

concern the Kalman filter (see http://en.wikipedia.org/wiki/Kalman_filter)

1 LIST 10-19

5 ' Evangelos Rozos Jan. 2012

11 ' This program investigates the

12 ' dimensions of matrices in

13 ' algebraic formulas.

14 '

15 ' Define matrices in lines

16 ' 20-99, define the expression in

17 ' line 110 (valid operands are +

18 ' and *). Run with RUN 10.

19 '

20 ' Define matrix dimensions

21 ' ************************

25 X$="nx1" ' n=no. of variables

35 Z$="ox1" ' o=no. of observations

40 E$=Z$

45 P$="nxn": Q$=P$: F$="nxn": FT$=F$

55 H$="oxn": HT$="nxo"

60 R$="oxo": S$=R$

65 K$="nxo"

100 '

101 ' Expression

102 ' **********

110 XSN$= H$ + "*" + P$ + "*" + HT$ + "+" + R$

200 '

201 ' Parse multiplications

202 ' *********************

205 LR$=MID$(XSN$,1,1)

207 LC$=MID$(XSN$,3,1)

210 FOR II=3 TO LEN(XSN$)-3 STEP 4

220 : OPER$=MID$(XSN$,II+1,1)

230 : RR$=MID$(XSN$,II+2,1)

240 : RC$=MID$(XSN$,II+4,1)

250 : IF OPER$="*" THEN GOTO 300

255 : IF OPER$<>"+" THEN GOTO 600

260 : XPN$=XPN$+LR$+"x"+LC$+"+"

270 : LR$=RR$: LC$=RC$

280 NEXT

290 XPN$=XPN$+LR$+"x"+LC$

295 GOTO 400

300 '

301 ' Check multiplication

302 ' ********************

305 IF LC$=RR$ THEN GOTO 335

307 IF LR$="1" AND LC$="1" THEN GOTO 333

310 PRINT "Multiplication error!"

315 PRINT "LCOL,RROW="LC$","RR$

330 END

333 LR$=RR$

335 LC$=RC$

340 GOTO 280 ' RETURN

400 '

401 ' Parse additions

402 ' ***************

403 IF LEN(XPN$)=3 THEN GOTO 498

405 LR$=MID$(XPN$,1,1)

407 LC$=MID$(XPN$,3,1)

410 FOR II=3 TO LEN(XPN$)-3 STEP 4

420 : OPER$=MID$(XPN$,II+1,1)

430 : RR$=MID$(XPN$,II+2,1)

440 : RC$=MID$(XPN$,II+4,1)

460 : GOSUB 500

470 NEXT

497 '

498 PRINT "Result is "LR$"x"RC$

499 END

500 '

501 ' Check addition

502 ' **************

505 IF LC$=RC$ AND LR$=RR$ THEN GOTO 535

510 PRINT "Addition error!"

515 PRINT "Left is "LR$"x"LC$

517 PRINT "Rght is "RR$"x"RC$

530 END

535 RETURN

600 '

601 PRINT "Invalid operand!"

602 END

V.

This program checks out the multiplication and addition between

matrices. More specifically, the program checks if the dimensions of

matrices follow the requirements of the operation and if so, it returns

the dimensions of the resulting matrix.

Instructions

First define the dimensions of matrices in lines 20-100. The

dimensions should be a string of three characters with the form "nxm"

("n" and/or "m" could be numbers or letters). Then define the

expression string in line 110. Only "*" and "+" can be used in this

program (parentheses cannot be processed). Run the program with RUN 10.

The matrices in lines 25-65 and the expression in 110 in this code

concern the Kalman filter (see http://en.wikipedia.org/wiki/Kalman_filter)

1 LIST 10-19

5 ' Evangelos Rozos Jan. 2012

11 ' This program investigates the

12 ' dimensions of matrices in

13 ' algebraic formulas.

14 '

15 ' Define matrices in lines

16 ' 20-99, define the expression in

17 ' line 110 (valid operands are +

18 ' and *). Run with RUN 10.

19 '

20 ' Define matrix dimensions

21 ' ************************

25 X$="nx1" ' n=no. of variables

35 Z$="ox1" ' o=no. of observations

40 E$=Z$

45 P$="nxn": Q$=P$: F$="nxn": FT$=F$

55 H$="oxn": HT$="nxo"

60 R$="oxo": S$=R$

65 K$="nxo"

100 '

101 ' Expression

102 ' **********

110 XSN$= H$ + "*" + P$ + "*" + HT$ + "+" + R$

200 '

201 ' Parse multiplications

202 ' *********************

205 LR$=MID$(XSN$,1,1)

207 LC$=MID$(XSN$,3,1)

210 FOR II=3 TO LEN(XSN$)-3 STEP 4

220 : OPER$=MID$(XSN$,II+1,1)

230 : RR$=MID$(XSN$,II+2,1)

240 : RC$=MID$(XSN$,II+4,1)

250 : IF OPER$="*" THEN GOTO 300

255 : IF OPER$<>"+" THEN GOTO 600

260 : XPN$=XPN$+LR$+"x"+LC$+"+"

270 : LR$=RR$: LC$=RC$

280 NEXT

290 XPN$=XPN$+LR$+"x"+LC$

295 GOTO 400

300 '

301 ' Check multiplication

302 ' ********************

305 IF LC$=RR$ THEN GOTO 335

307 IF LR$="1" AND LC$="1" THEN GOTO 333

310 PRINT "Multiplication error!"

315 PRINT "LCOL,RROW="LC$","RR$

330 END

333 LR$=RR$

335 LC$=RC$

340 GOTO 280 ' RETURN

400 '

401 ' Parse additions

402 ' ***************

403 IF LEN(XPN$)=3 THEN GOTO 498

405 LR$=MID$(XPN$,1,1)

407 LC$=MID$(XPN$,3,1)

410 FOR II=3 TO LEN(XPN$)-3 STEP 4

420 : OPER$=MID$(XPN$,II+1,1)

430 : RR$=MID$(XPN$,II+2,1)

440 : RC$=MID$(XPN$,II+4,1)

460 : GOSUB 500

470 NEXT

497 '

498 PRINT "Result is "LR$"x"RC$

499 END

500 '

501 ' Check addition

502 ' **************

505 IF LC$=RC$ AND LR$=RR$ THEN GOTO 535

510 PRINT "Addition error!"

515 PRINT "Left is "LR$"x"LC$

517 PRINT "Rght is "RR$"x"RC$

530 END

535 RETURN

600 '

601 PRINT "Invalid operand!"

602 END

V.

### Re: Check dimensions

I believe you must have changed the program but forgot to change thatvrozos wrote:14 ' Run the program with RUN 10.

check

Dbug is right, of course. Line 14 should be:

14 ' Run the program with RUN 11.

or change line 11 to be line 10.

BTW, if you find these programs useful then you may want to run them

directly from your prompt without the Oric-nostalgia thing. With minor

modifications (replace single quotes (') with REM, remove the lines that

do LIST) you can use VintageBasic (http://www.vintage-basic.net/) for

this reason. An extra advantage of using VintageBasic is that some of the

restrictions of the Oric variables' naming are lifted.

V.

### Who is online

Users browsing this forum: No registered users and 4 guests