Eclipse and WUDSN IDE
- barnsey123
- Flight Lieutenant
- Posts: 379
- Joined: Fri Mar 18, 2011 10:04 am
- Location: Birmingham
Eclipse and WUDSN IDE
Hi Guys,
I know this topic has been discussed before in various dark corners of the interweb but that was a couple of years ago. I only started using WUDSN yesterday to dip my toe in the water for an Atari A8 project (who am I kidding...who's got the time!?) BUT it looks like it could benefit Oric coders (both new coders and those who are a bit more old skool). Havic oric at least visible in WUDSN might drag a few more coders in? http://www.wudsn.com/
With WUDSN supporting more 6502 platforms it would be a shame to see Oric left out in the cold. Are there any technical restrictions which preclude Oric's inclusion? Don't get me wrong, I love using OSDK but it's always nice to have different tools sometimes (especially if - like me - your not yet too hot on ASM)
I won't lose any sleep if it can't be done but it would be a "nice to have" (I think)
I know this topic has been discussed before in various dark corners of the interweb but that was a couple of years ago. I only started using WUDSN yesterday to dip my toe in the water for an Atari A8 project (who am I kidding...who's got the time!?) BUT it looks like it could benefit Oric coders (both new coders and those who are a bit more old skool). Havic oric at least visible in WUDSN might drag a few more coders in? http://www.wudsn.com/
With WUDSN supporting more 6502 platforms it would be a shame to see Oric left out in the cold. Are there any technical restrictions which preclude Oric's inclusion? Don't get me wrong, I love using OSDK but it's always nice to have different tools sometimes (especially if - like me - your not yet too hot on ASM)
I won't lose any sleep if it can't be done but it would be a "nice to have" (I think)
- coco.oric
- Squad Leader
- Posts: 720
- Joined: Tue Aug 11, 2009 9:50 am
- Location: North of France
- Contact:
Re: Eclipse and WUDSN IDE
Hello, i've also (for Apple) installed this environment on my pc.
I've not tried it at the moment so it would be a good help for me if you send me a sample to test it.
Didier
I've not tried it at the moment so it would be a good help for me if you send me a sample to test it.
Didier
coco.oric as DidierV, CEO Member
Historic owner of Oric, Apple II, Atari ST, Amiga
Historic owner of Oric, Apple II, Atari ST, Amiga
Re: Eclipse and WUDSN IDE
Could you write a summary of what this IDE exactly does, and what would be necessary to make it usable for the Oric?
-
- Squad Leader
- Posts: 774
- Joined: Sat May 21, 2011 7:21 pm
- Location: Between UK and France
- Contact:
Re: Eclipse and WUDSN IDE
But WHY use eclipse????
It's just make it a no-go for me, and a lots of other people I know.
It's just make it a no-go for me, and a lots of other people I know.
My Projects: Replic'Oric Project - StratoCumulus Project
- barnsey123
- Flight Lieutenant
- Posts: 379
- Joined: Fri Mar 18, 2011 10:04 am
- Location: Birmingham
Re: Eclipse and WUDSN IDE
A description here from pouet from 2011: http://www.pouet.net/topic.php?which=7997&page=1 things have probably changed since then.
@dbug: On the link JAC (the author of WUSDN) says that "all" we need is an XML file and some classes which probably makes sense if I knew more about it. I've only used the thing for a few minutes so I'm no expert. Maybe it'll make sense later. I'll contact JAC to see if he can explain what we need.
@coco: I haven't got any Apple II ASM to send you but there's probably some on the web somewhere.
@Godzil: Why use eclipse? Don't know, but the IDE does show coding errors (click on the error and it takes you to the offending line of code). I know some people hate it but I haven't used it enough to understand why. I can't see any obvious issues. It looks like a nice environment, select your preferred assembler and preferred emulator and hit "compile and run". Obviously if you are an expert ASM coder (probably most of you reading this) then you probably don't need it but for beginners it's probably very helpful, especially of you are coding on more then one platform (as I intend to do).
The integrated nature of the thing will appeal to some people. Having the editor, filesystem, debugger etc all accessible from one screen simplifies the process of development. That is why such things exist. Again, I suppose it's personal preference. An example: I've tried to like JEDIT but I keep going back to Crimson Editor coz I like it and it works for me.
For Oric I'll continue to use OSDK coz I'm familiar with it but could use WUDSN to help track down future ASM issues. HNEFATAFL 2.0 exists in my head which will make more use of ASM and I'm thinking of a port to A8 so it sort of makes sense to use one tool (for my sanity's sake)
@dbug: On the link JAC (the author of WUSDN) says that "all" we need is an XML file and some classes which probably makes sense if I knew more about it. I've only used the thing for a few minutes so I'm no expert. Maybe it'll make sense later. I'll contact JAC to see if he can explain what we need.
@coco: I haven't got any Apple II ASM to send you but there's probably some on the web somewhere.
@Godzil: Why use eclipse? Don't know, but the IDE does show coding errors (click on the error and it takes you to the offending line of code). I know some people hate it but I haven't used it enough to understand why. I can't see any obvious issues. It looks like a nice environment, select your preferred assembler and preferred emulator and hit "compile and run". Obviously if you are an expert ASM coder (probably most of you reading this) then you probably don't need it but for beginners it's probably very helpful, especially of you are coding on more then one platform (as I intend to do).
The integrated nature of the thing will appeal to some people. Having the editor, filesystem, debugger etc all accessible from one screen simplifies the process of development. That is why such things exist. Again, I suppose it's personal preference. An example: I've tried to like JEDIT but I keep going back to Crimson Editor coz I like it and it works for me.
For Oric I'll continue to use OSDK coz I'm familiar with it but could use WUDSN to help track down future ASM issues. HNEFATAFL 2.0 exists in my head which will make more use of ASM and I'm thinking of a port to A8 so it sort of makes sense to use one tool (for my sanity's sake)
Re: Eclipse and WUDSN IDE
The thing is, Eclipse is large (large like HUGE), slow to start, full of menus all over the place, etc... I sure hope the WUDSN is a trimmed down version of Eclipse
(Also, it's written in Java, and I'm trying to get rid of Java on all my computers, the only thing that needs it is my netbank identification system).
Using an IDE makes sense only if it simplify things or bring features you actually use.
Since you are already using Crimson Editor, do you know that you can compile directly from it, and run the program without quitting the IDE?
I'm pretty sure it can also show the list of errors and supports clicking on them to open the right file.
That being said, there's a 30 minutes presentation of the system:
https://www.youtube.com/watch?v=tk3Y7mtPwUo
(Also, it's written in Java, and I'm trying to get rid of Java on all my computers, the only thing that needs it is my netbank identification system).
Using an IDE makes sense only if it simplify things or bring features you actually use.
Since you are already using Crimson Editor, do you know that you can compile directly from it, and run the program without quitting the IDE?
I'm pretty sure it can also show the list of errors and supports clicking on them to open the right file.
That being said, there's a 30 minutes presentation of the system:
https://www.youtube.com/watch?v=tk3Y7mtPwUo
- coco.oric
- Squad Leader
- Posts: 720
- Joined: Tue Aug 11, 2009 9:50 am
- Location: North of France
- Contact:
Re: Eclipse and WUDSN IDE
I've now succeeded in using WUDSN. It's a very fat package.
Only asm code is allowed, it's a big limitation for such a big tool.
I think i'll continue to use Crimson Editor, and the OSDK package. It will be lighter and more powerful.
May be the best "global" solution could be WUDSN with CC65 inside.
Only asm code is allowed, it's a big limitation for such a big tool.
I think i'll continue to use Crimson Editor, and the OSDK package. It will be lighter and more powerful.
May be the best "global" solution could be WUDSN with CC65 inside.
coco.oric as DidierV, CEO Member
Historic owner of Oric, Apple II, Atari ST, Amiga
Historic owner of Oric, Apple II, Atari ST, Amiga
-
- Pilot Officer
- Posts: 97
- Joined: Thu Jan 26, 2006 11:27 pm
- Location: St. Helens, Merseyside, UK
Re: Eclipse and WUDSN IDE
Hi all,
I use Eclipse at work and yes it is quite a bulky application and has a lot of menus which can be very confusing. Not sure it would be an ideal solution for Oric development especially as it will only do ASM.
Along side my Oric Explorer application, I'm also working on an IDE for Oric development called Oric Developer. It's very much in it's early stages at the moment but it will allow both BASIC and ASM code to be developed. One feature will be allowing the user to click on an error and it will take you straight to the piece of code in error.
This is a screenshot of the main screen.
I use Eclipse at work and yes it is quite a bulky application and has a lot of menus which can be very confusing. Not sure it would be an ideal solution for Oric development especially as it will only do ASM.
Along side my Oric Explorer application, I'm also working on an IDE for Oric development called Oric Developer. It's very much in it's early stages at the moment but it will allow both BASIC and ASM code to be developed. One feature will be allowing the user to click on an error and it will take you straight to the piece of code in error.
This is a screenshot of the main screen.
Re: Eclipse and WUDSN IDE
Along with a trolls activity, I read about the "Oric developer" tool again by Yicker.
Why did you give up enhancing the oric explorer? The oric hrs viewer, PC diassembler, disc viewer etc. was incredible. It has been a long time that nothing is heard about the oric explorer. I hope the softare will be updated soon..
Why did you give up enhancing the oric explorer? The oric hrs viewer, PC diassembler, disc viewer etc. was incredible. It has been a long time that nothing is heard about the oric explorer. I hope the softare will be updated soon..
- coco.oric
- Squad Leader
- Posts: 720
- Joined: Tue Aug 11, 2009 9:50 am
- Location: North of France
- Contact:
Re: Eclipse and WUDSN IDE
The same for me, i hope that oric explorer will be upgraded. There's a lot of tools for apple ii, c64, amstrad and a more powerful oric explorer will be a must have.
waiting for ... or learning c# to build one ?
waiting for ... or learning c# to build one ?
coco.oric as DidierV, CEO Member
Historic owner of Oric, Apple II, Atari ST, Amiga
Historic owner of Oric, Apple II, Atari ST, Amiga
-
- Pilot Officer
- Posts: 97
- Joined: Thu Jan 26, 2006 11:27 pm
- Location: St. Helens, Merseyside, UK
Re: Eclipse and WUDSN IDE
Hi all,
Just to let you know I have been working on Oric Explorer V2.0. There is still a lot of work to do but I'm hoping in the next couple of weeks to have a usable version for people to take a look at. It will only be basic functionality but hopefully there should be enough there for people to try out and give me some feedback.
Cheers
Scott
Just to let you know I have been working on Oric Explorer V2.0. There is still a lot of work to do but I'm hoping in the next couple of weeks to have a usable version for people to take a look at. It will only be basic functionality but hopefully there should be enough there for people to try out and give me some feedback.
Cheers
Scott
- coco.oric
- Squad Leader
- Posts: 720
- Joined: Tue Aug 11, 2009 9:50 am
- Location: North of France
- Contact:
Re: Eclipse and WUDSN IDE
Scott, you can ask me to be a beta tester if you need it.
It will be a pleasure for me.
Didier
It will be a pleasure for me.
Didier
coco.oric as DidierV, CEO Member
Historic owner of Oric, Apple II, Atari ST, Amiga
Historic owner of Oric, Apple II, Atari ST, Amiga
Re: Eclipse and WUDSN IDE
Can't wait, Oric Explorer is a wonderful program indeed !
Re: Eclipse and WUDSN IDE
Oh its a very great news ! So happy to hear that.
I hope, one day, there will be picture / font editing functionality in it too
I hope, one day, there will be picture / font editing functionality in it too
-
- Squad Leader
- Posts: 774
- Joined: Sat May 21, 2011 7:21 pm
- Location: Between UK and France
- Contact:
Re: Eclipse and WUDSN IDE
Yicker: Any chance to have Oric Explorer working on another platform than Windows?
I could provide help to port it to OS X (and using the native UI would be great, better than using Qt )
I could provide help to port it to OS X (and using the native UI would be great, better than using Qt )
My Projects: Replic'Oric Project - StratoCumulus Project